Kingston 4GB (512x8) 1600MHz DDR3 Non-ECC CL11 DIMM SR [KVR16N11S8/4]

SKU 704050
$35.00
In StockDispatch in 1-2 Working days
$35.00

Kingston 4GB 1600MHz DDR3 Non-ECC CL11 DIMM SR (512x8) [KVR16N11S8/4]

 

This document describes Value RAM's 512M x 64-bit (4GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

 

Features

JEDEC standard 1.5V (1.425V ~1.575V) Power Supply

VDDQ = 1.5V (1.425V ~ 1.575V)

800MHz fCK for 1600Mb/sec/pin

8 independent internal bank

Programmable CAS Latency: 11, 10, 9, 8, 7, 6

Programmable Additive Latency: 0, CL - 2, or CL - 1 clock

8-bit pre-fetch

Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]

Bi-directional Differential Data Strobe

Internal(self) calibration: Internal self-calibration through ZQ pin (RZQ: 240 ohm ± 1%)

On Die Termination using ODT pin

Asynchronous Reset

PCB: Height 0.740” (18.75mm) or 1.180” (30.00mm)

Memory Type: DDR3

Memory Capacity: 4 GB (512 MB x 8)

Form Factor: DIMM 240-pin

Memory Speed: PC3-12800 (800 MHz)

Ranking: Single

Voltage: 1.5V 

Manufacturer Warranty: Limited Lifetime Warranty

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.